Click on images to enter galleries
December 2018 – Renewable energy course with the Indian National Institute of Wind Energy
July 2018 – Renewable energy course for university students in South Africa
November 2017 – Rural electrification project in Nepal using locally manufactured wind turbines
July 2016 – Laboratory testing of a 3D printed turgo turbine for a 350W pico hydro system
October 2015 – Rural electrification project in Ethiopia using locally manufactured wind turbines
December 2015 – Assembly of the Prusha i3 3D printer at the Athens Hackerspace
July 2015 – Neodymium magnet generator for a 6m rotor SWT for battery charging
July 2015 – 350W small hydro turbine with an iron powder core for battery charging
January 2015 – Rural electrification project in Ethiopia using a locally manufactured wind turbine
August 2013 – Ferrite magnet generator for a 2.4m rotor SWT for battery charging
July 2013 – Construction of the NTUA small wind turbine test site in Rafina
June 2012 – Laboratory testing of a 350W small hydro turbine for grid connection at NTUA
June 2012 – Laboratory testing of an 850W axial flux generator and OSH diversion load controller
May 2012 – Construction of a 350W small hydro turbine for grid connection
March 2011 – SWT test site at NTUA according to IEC 61400-12-1
February 2011 – Laboratory testing of an 850W axial flux generator for 48VDC at NTUA
February 2011 – Laboratory testing of a 3kW axial flux generator at NTUA
December 2010 – Construction of a 3kW generator for a 3.4m rotor SWT for grid connection
November 2010 – Wind tunnel testing of a 1.2m rotor diameter SWT at NTUA
September 2010 – Installation of a 1.8m rotor diameter SWT for grid connection, Rafina
June 2010 – Construction of a 1.8m rotor diameter SWT for grid connection
November 2009 – Installation of a 2.4m rotor diameter SWT at NTUA for grid connection
October 2009 – Laboratory testing of a 850W axial flux generator at NTUA
April 2009 – Construction of a 2.4m rotor diameter SWT for 48VDC battery connection